When operating any crusher, there are always opportunities to improve performance, reduce energy consumption and maximise the production of the customer’s desired products.
With cone crushers, cavity selection and liner profile geometry play a significant role in achieving these outcomes. Selecting the correct liner profile for the application can improve crushing efficiency, optimise operating parameters and deliver greater overall plant performance.
“A drop of 50 kW is significant, that’s about $45,000 per year savings for us.”
Ross Ashby, Engineering Manager, Stevenson Aggregates
The challenge
Stevenson Aggregates was looking to operate its secondary Metso GP300S™ cone crusher at a larger closed-side setting (CSS) to provide a suitable feed size for the next stage of the process.
To achieve the required larger CSS, the customer had been either mismatching worn and new liners or operating at a tighter CSS until the liners had worn sufficiently to allow a larger setting.
Both practices created operational compromises, resulting in reduced secondary crusher capacity and lower overall plant production until the liners had worn enough to allow operation at the desired setting.
The solution
To overcome this challenge, MIMICO initially recommended a trial using machined liners. This allowed the crusher to operate at the required larger CSS from the beginning of the liner’s service life, enabling the customer to achieve the desired feed size and production capacity from new.
While successful, machining liners is a costly process.
The next step was to trial Metso’s Extra Coarse LS liner profile. Depending on the crusher stroke, this profile allows operation at closed-side settings of up to 70 mm.
By selecting a liner profile better suited to the application, the customer could achieve the required CSS with new liners while maintaining optimum crusher operating parameters.
The results
| Measure | Result |
|---|---|
| Reduced power consumption | 160-180 kW to 110-130 kW |
| Power savings | 29% reduction |
| Reduced operating pressure | 10-12 bar to 7-8 bar |
| Maintained throughput | No reduction |
| Consistent product | Minimal change |
The conclusion
This application demonstrates the importance of selecting the correct cavity and liner profile for the operating conditions of a cone crusher.
By moving to Metso’s Extra Coarse LS liner profile, Stevenson Aggregates was able to achieve its required closed-side setting from new, maintain production capacity and significantly reduce energy consumption.
A relatively simple change in liner profile delivered measurable improvements in crusher efficiency, operating costs and overall plant performance.
To review the cavity and liner profile on your cone crusher, contact the MIMICO parts and wear parts team on 0800 646 426.
