Dynapac CC2200C

COMPACTS ANY TYPE OF ASPHALT MIX

With high frequency/low amplitude for thin layers and high amplitude for thick layers the machines are versatile and will efficiently compact any type of asphalt mix. Thin layers with high stone content cool off quickly and need to be compacted fast, but use of a high amplitude risks crushing the aggregate. Dynapac recommends a high frequency and lower amplitude. As an alternative for thin asphalt layer compaction. Bridge compaction, compaction near foundations and concrete structures Dynapac also offers variants with oscillation on the rear drum.

STEERING SYSTEM WITH FLEXIBILITY

All machines can be equipped with the optional offset drum (split drum and combi rollers have off-set as standard.) This in combination with the asymmetric cab make the machines very easy to operate.

POWERFUL ENGINE

The models are powered by Cummins QSB 3.3 Stage IIIA/T3, Deutz TCD 3.6 HT T4f and Deutz TCD 3.6 HT Stage V engines. Dynapac’s automatic engine idling system together with a highly efficient hydraulic system makes fuel consumption low and efficient. Infinite adjustable maximum speed is standard.

OUTSTANDING OPERATOR COMFORT

We have equipped the machines with slideable and turnable seat and steering module for best ergonomics. The engine is placed on the rear module with less heat and noise for the operator. The very low vibration level on the operator’s platform also adds to the comfort of the operator.

ENVIRONMENTAL THINKING

Environmental benefits are achieved through reduced fuel consumption and quieter operation. Efficiency enhancements have saved up to 8 kW/11 hp in the operation of a typical model in the range, with consequent improvements in the running costs and noise. Additional fuel savings up to 20% is achieved through our unique “ECOMode” concept.

ECOMode is standard on the T4f and Stage V engine alternatives and we are also using the high efficient eccentrics and serial start up of the eccentric shafts for lowest possible energy consumption. Biodegradable hydraulic fluid is optional. The automatic idling system keep exhaust emission on a low level.

EASY MAINTENANCE IN EVERY DETAIL

Daily service points are few and easily accessible. The position of the engine on the rear module and the large, easy to-open engine hoods contribute to easy and fast service.

The service info displayed directly on the drivers LCD also faciliates service jobs. With maintenance free steering hitch and steering cylinder, very few grease nipples are found on these machines. At the same time, the periods between servicing have been extended.

Corrosion-free water tank and sprinkler tubes, in combination with easily accessible filters, ensure reliability and easy maintenance. Hydraulic hoses can be replaced in individual segments, avoiding the need to fit a full length. Drum shock absorbers also benefit from easy replacement – there is no need to remove the forks or the drums.

MASSES

• Max. operating mass: 8200 kg
• Operating mass (incl. ROPS): 7400 kg
• Module mass (front/rear): 3850 kg/ 3550 kg

TRACTION

• Speed range: 0-12 km/h
• Vertical oscillation: ±7
• Theor. gradeability: 49 %

COMPACTION

• Wheel load: 888 kg/wheel
• Centrifugal force (high/low amplitude): 78/ 67 kN
• Nominal amplitude (high/low): 0.70/ 0.30 mm
• Static linear load: 25.7 kg/cm
• Vibration frequency (high/low amplitude): 48/ 67 Hz
• Water tank: 750 l
• Emulsion tank: 78 l

• A. Wheelbase3340 mm
• B. Width1620 mm
• C. Curb clearance715 mm
• D. Drum diameter1150 mm
• H1. Height, with ROPS/cab2990 mm
• K. Ground clearance270 mmL. Length4490 mm
• O. Off-set335 mm
• R1. Turning radius, outside6570 mm
• R2. Turning radius, inside5070 mm
• R3. Turning radius with off-set, outside4890 mm
• R4. Turning radius with off-set, inside3390 mm
• S. Drum shell thickness20 mm
• W1. Drum width1500 mm
• W2. Width, wheel module1454 mm
• W3. Width, tyre285 mm
• W4. Wheel track441 mm
• W5. Wheel spacing75 mm
• α. Steering angle±32°